FOR IMMEDIATE RELEASE
PRME NATURALLYTM
GAS SYSTEMS
Your PRME NaturallyTM produced biogas will come from
biomass – not fossil fuels. Technically
speaking, you will be firing gas
produced by the thermal
gasification of biomass. PRME’s
NaturallyTMGas
process design is not experimental or “under development”, but has
been commercially firing industrial boilers for over eighteen years.
PRME’s NaturallyTMGas Systems are available from 500kWe to
35MWe for the following applications:
Biomass Fired Engine Generator Systems
Biomass Fired Turbine Generator Systems
Co-Fire NaturallyTMGas Systems
Conventional Steam Cycle Systems
Direct NaturallyTMGas Drying Systems
Power generating utilities will find many
advantages and opportunities for NaturallyTMGas Co-Firing:
è
Reduction/elimination of slagging and fouling of boiler surfaces as is
experienced with solid fuel cofiring.
è
Elimination of solid fuel preparation for co-blending.
è
Elimination of coal ash contamination caused by biomass fuel
co-blending.
è
Greater “green” fuel flexibility utilizing renewable agricultural
and forest residues, segregated municipal solid waste (RDF) and dedicated energy
crops.
è
Potential for reduced SO2 and NOx emissions.
è
Reduction in “green house” gases from firing with fossil fuels.
The PRME Biomass Gasifier is the ultimate stand-alone
NaturallyTMGas system which makes firing boilers safer, cheaper and
faster. The biogas can be
fired directly into your existing power boiler. Precise control of the Gasification system can be exercised
from an existing control room without additional operators.
We can build, own and operate the system, and sell you the biogas; or you can buy your own PRME NaturallyTM Gas System. You tell us!
For More Information Contact:
PRM Energy Systems, Inc.
504 Windamere Terrace, Hot Springs, Arkansas 71913
Tel: 501-767-2100
FAX: 501-767-6968
IEmail:
info@prmenergy.com
Copyright 2006. All rights reserved by PRM Energy Systems, Inc.